Quick Product Search
- Printer Ink Cartridges
- Colour Laser Printer Toner
- Mono Laser Printer Toner
- Digital Copier Toner
- Computer Data Storage
- Digital Sender Parts
- Fax Toner, Ink & Film
- Interactive Whiteboards
- Network Infrastructure
- Printer Image Drum Units
- Printer Developer
- Printer Fuser Clean/Film/Oil
- » Printer Fuser Units
- Printer Hardware/Firmware
- Printer Maintenance Kits
- Printer Paper
- Printer Process Units
- Printer Ribbon/Tape/Label
- Printer Spares Rollers/Pads
- Printer Transfer Belts & Kits
- Printer Transfer Rollers
- Printer Waste Toner Kits
- Projector Lamps
Canon Fuser Unit RM1-4349
Part No: RM1-4349-040
Low priced Canon Fuser Unit RM1-4349, RM1-4349-030, RM1-4349-040, RC1-7606 compatible with
Canon iR C1021i, C1021iF Printer/Copier/Scan/Fax fuser
Canon i-SENSYS LBP-5300 Colour Laser Printer fuser
Canon i-SENSYS LBP-5360 Colour Laser Printer fuser
Canon i-SENSYS MF8450 Colour Laser Multifunction fuser
Canon i-SENSYS MF9130 Colour Laser Multifunction fuser
Canon i-SENSYS MF9170 Colour Laser Multifunction fuser
This fuser often has a sticker RC1-7606 or RCI-7606 to indicate 220/240v UK usage
Please note that if the Canon badged RM1-4349 is unavailable we may supply the identical Canon fuser with a Hewlett Packard (HP) badge
Common Canon Error Codes :
The fixing temperature does not go up after turning ON the power
due to a fault in the thermistor or the heater, etc., (e.g. It does not
reach 70°C degrees within 2 min.)
The fixing temperature abnormally goes up due to a fault in the
thermistor or SSR, etc.
The fixing temperature does not reach a specific temperature due
to a fault in the thermistor or the heater, etc.
e.g) The fixing temperature does not go up to 190°C degrees
within 5 min after reaching 70°C degrees.
The fixing temperature drops abnormally after wait time is up due
to a fault in the thermistor, the heater, etc. (e.g. After wait time is
up, the fixing temperature drops to 70°C degrees).
A short circuit in the fixing heater drive circuit (SSR, etc) is
E005 The fixing web is wound up completely.
E006 The fixing drawer connector is not connected as the front door is closed.
E007 The fixing film is off to the side.
A specific number of copies are made after the machine detects
that fixing oil is out.
E009 The rated voltages of the power supply and the fixing unit do not
E010 Clock pulses fail to be generated or the PLL lock fails to be
released due to a fault in the main motor unit
E011 Excess current flows to the motor control circuit because the main
Clock pulses fail to be generated or the PLL lock is released due to
a fault in the drum motor, etc.
This fuser also fits the following HP Colour LaserJet printers
HP 2700, HP 3000, HP3600, HP 3800, HP CP3505
Why not ask Tonercare to quote on your next Canon toner order - you may be surprised how much you can save........